HomeCalcs

Paint Calculator

Work out how much paint you need for a room's walls and ceiling, with doors, windows and coats included.

A person painting a living room wall green with a roller
Paint · walls & ceiling
Preview color

—

The result is an estimate. Check the coverage on your paint can and round up: running out halfway through a wall is worse than having a little left for touch-ups.

How the calculator works

It adds up the area of the four walls (the perimeter of the room times the wall height), takes away the doors and windows, and multiplies by the number of coats. If you tick the ceiling, it adds the floor area once per coat. Then it divides by the coverage of one gallon or one liter.

For doors it takes 21 sq ft (about 1.9 m²) each, the size of a standard 30 x 80 inch interior door. For windows it takes 15 sq ft (about 1.4 m²) each. If your openings are much bigger, such as patio doors or a bay window, measure them and lower the wall size instead.

A worked example

Take a bedroom of 12 x 14 ft with 8 ft walls, one door and two windows, painted with two coats:

Coverage: why the can says one thing and your wall another

Most interior wall paints claim around 350 to 400 sq ft per gallon (about 9 to 10 m² per liter). That figure is for a smooth wall that is already primed. In real rooms you will often get less:

SurfaceTypical coverage per gallonPer liter
Smooth, previously painted wall350–400 sq ft9–10 m²
New drywall (after primer)300–350 sq ft7.5–9 m²
Textured or popcorn surface250–300 sq ft6–7.5 m²
Bare plaster, brick or concrete200–300 sq ft5–7.5 m²

These are general ranges, not figures from a specific brand. Use the number on your can when you have it, and lower it if your wall is rough or very absorbent.

One coat or two?

Two coats is the safe default. The first coat soaks into the wall unevenly and shows patches; the second evens out the color and the sheen. You can sometimes get away with one coat when:

Going from a dark color to a light one, or painting strong colors such as red or yellow, often needs three coats, or a tinted primer first.

Do you need primer?

Use a primer on new drywall, bare plaster, patched areas, stains, glossy old paint and big color changes. Primer seals the surface so the paint does not soak in, which also means you use less of the more expensive top coat. Primer covers a similar area to paint, so you can run this calculator again with one coat to know how much to buy.

Ceilings, trim and doors

A ceiling has the same area as the floor: length times width. Ceiling paint is usually flat white and is thicker, so coverage can be a bit lower. Trim such as baseboards, door frames and window frames is small in area but is painted with a different paint, normally semi-gloss. For an average room, a quart of trim paint is usually enough.

Tips to avoid buying too much or too little

Frequently asked questions

How much paint do I need for a 12x12 room?

A 12 x 12 ft room with 8 ft ceilings has about 384 sq ft of wall. Take away one door and two windows (about 51 sq ft) and you have roughly 333 sq ft. At 350 sq ft per gallon, two coats need about 1.9 gallons, so buy 2 gallons.

Do I need two coats of paint?

Usually yes. Two coats give an even color and a tougher finish. One coat can be enough when you repaint with a very similar color over a clean wall in good condition.

How many square feet does a gallon of paint cover?

Most interior wall paints cover about 350 to 400 sq ft per gallon on smooth, primed walls. Rough or porous surfaces can drop that to 250 sq ft or less. The label on the can gives the figure for that product.

Should I subtract doors and windows?

Yes for big openings, because they change the total. For a single small window the difference is small, and the extra paint is useful for touch-ups.

How much is a quart or a liter compared to a gallon?

A US gallon is 3.785 liters, and a quart is a quarter of a gallon (about 0.95 liters). In Europe paint is usually sold in 0.75, 2.5, 4, 5 and 10 liter cans.

More calculators